PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 775-6
775-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SPHERE MOLD,GLASS BACK is a the manufacturer industrial component. Key specifications include color: BLACK, width: 0.500 INCHES IN, length: 15.000 YARDS, material: PLASTIC POLYAMIDE NYLON LOCATION NOT OTHERWISE SPECIFIED, special_features: CARTIDGE; 4 MIL,HIGH DENSISTY, type/model_designation: EPSON AMERICA INC.. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-793-3684, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
775-6
NSN: 5330-00-793-3684
FSC: 5330
CAGE: 81904 — G T I CORP CLOVER INDUSTRIES DIV (USA)
SPECIFICATIONS
colorBLACK
width0.500 INCHES IN
length15.000 YARDS
materialPLASTIC POLYAMIDE NYLON LOCATION NOT OTHERWISE SPECIFIED
special_featuresCARTIDGE; 4 MIL,HIGH DENSISTY
type/model_designationEPSON AMERICA INC.
end_item_identificationLQ-2500 AND LQ-2550
NSN5330-00-793-3684
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 775-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
P1001-6Interchangeable
interchangeable cross-reference
interchangeable
920805Interchangeable
interchangeable cross-reference
interchangeable
DS-920805Interchangeable
interchangeable cross-reference
interchangeable
EP 161832Interchangeable
interchangeable cross-reference
interchangeable
B1618-16Interchangeable
interchangeable cross-reference
interchangeable
PV-117-AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 775-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 775-6?
775-6 is a SPHERE MOLD,GLASS BACK.
What parts can replace 775-6?
There are 14 known substitutes for 775-6: P1001-6, 920805, DS-920805 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 775-6?
775-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-793-3684. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 775-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026