PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 104A901885
104A901885 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OR STEEL COMP 416 OVERALL, shear_strength: 1000 DOUBLE POUND, surface_finish: 16.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, hardness_rating: 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL, second_end_style: SQUARE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-806-7040, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
104A901885
NSN: 5315-00-806-7040
FSC: 5315
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 410 OR STEEL COMP 416 OVERALL
shear_strength1000 DOUBLE POUND
surface_finish16.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
hardness_rating36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleSQUARE
surface_treatmentPASSIVATE OVERALL
pin_overall_length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
pin_overall_diameter0.0939 INCHES MINIMUM AND 0.0941 INCHES MAXIMUM IN
first_end_taper_angle4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
first_end_taper_length0.103 INCHES NOMINAL IN
material_document_and_classificationASTM A493 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NSN5315-00-806-7040
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 104A901885 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHEAR STRENGTH: 1000 DOUBLE POUND
•
SURFACE FINISH: 16.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END TAPER ANGLE: 4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 410 OR STEEL COMP 416 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A493 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SHEAR STRENGTH1000 DOUBLE POUND
SURFACE FINISH16.0 MICROINCHES OUTSIDE DIAMETER
FIRST END TAPER ANGLE4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 410 OR STEEL COMP 416 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A493 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
PIN OVERALL LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
PIN OVERALL DIAMETER0.0939 INCHES MINIMUM AND 0.0941 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
103696Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-21143Interchangeable
interchangeable cross-reference
interchangeable
141119Interchangeable
interchangeable cross-reference
interchangeable
72600Interchangeable
interchangeable cross-reference
interchangeable
8P15-200-253Interchangeable
interchangeable cross-reference
interchangeable
3C3159P03Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 104A901885?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 104A901885?
104A901885 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 104A901885?
There are 20 known substitutes for 104A901885: 103696, MIL-P-21143, 141119 and 17 more. Substitute compatibility should be verified for your specific system.
Is 104A901885 still available?
104A901885 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 104A901885

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026