PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8P15-200-253
8P15-200-253 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1095 OVERALL, first_end_style: CHAMFERED, surface_treatment: OXIDE OVERALL, pin_overall_length: 0.437 INCHES NOMINAL IN, pin_overall_diameter: 0.0622 INCHES MINIMUM AND 0.0628 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-597-6100, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8P15-200-253
NSN: 5315-00-597-6100
FSC: 5315
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
materialSTEEL COMP 1095 OVERALL
first_end_styleCHAMFERED
surface_treatmentOXIDE OVERALL
pin_overall_length0.437 INCHES NOMINAL IN
pin_overall_diameter0.0622 INCHES MINIMUM AND 0.0628 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.005 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-597-6100
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8P15-200-253 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.005 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL LENGTH: 0.437 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SURFACE TREATMENT: OXIDE OVERALL
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL DIAMETER: 0.0622 INCHES MINIMUM AND 0.0628 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER LENGTH0.005 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL LENGTH0.437 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE TREATMENTOXIDE OVERALL
FIRST END STYLECHAMFERED
PIN OVERALL DIAMETER0.0622 INCHES MINIMUM AND 0.0628 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1095 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
103696Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-21143Interchangeable
interchangeable cross-reference
interchangeable
141119Interchangeable
interchangeable cross-reference
interchangeable
3C3159P03Interchangeable
interchangeable cross-reference
interchangeable
950111-61Interchangeable
interchangeable cross-reference
interchangeable
C536-31Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8P15-200-253?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8P15-200-253?
8P15-200-253 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 8P15-200-253?
There are 17 known substitutes for 8P15-200-253: 103696, MIL-P-21143, 141119 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8P15-200-253?
8P15-200-253 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-597-6100. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8P15-200-253

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026