PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 103725
103725 ✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

- For an SLR camera with zoom lens.<br>- Made of cotton material with embroidery.<br>- Zipper opening away from the body.<br>- Compartment for memory cards with zip under the lid.<br>- Additional front pocket with inside compartments for memory cards.<br>- Adjustable shoulder strap, can also be used as waist belt.<br>- Colour: Olive.<br>- Line: Outline.<br>- Material: Cotton.<br>- Model: Colt.<br>- Usage: Photo. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3725, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
103725
NSN: 5315-00-010-3725
FSC: 5315
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
fsc_application_dataDRIVE,CONSTANT SPEED,PNEUMATIC
end_item_identification16508727516
general_characteristics_item_descriptionALUMINUM ALLOY,1.690 IN. LG,0.500 IN. W,0.063 IN. THK IN
NSN5315-00-010-3725
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103725 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL LENGTH: 1.113 INCHES MINIMUM AND 1.137 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.1850 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
PIN OVERALL LENGTH1.113 INCHES MINIMUM AND 1.137 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.1850 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
103725Interchangeable
interchangeable cross-reference
interchangeable
R130Interchangeable
interchangeable cross-reference
interchangeable
SCB98664Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 103725?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103725?
103725 is a BRACKET,TUBE manufactured by Hama.
What parts can replace 103725?
There are 3 known substitutes for 103725: 103725, R130, SCB98664. Substitute compatibility should be verified for your specific system.
What is the NSN for 103725?
103725 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3725. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103725

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026