PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R130
R130 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include filter: NOT INCLUDED, material: STEEL COMP 1074 OVERALL, body_style: STRAIGHT THRU, bore_shape: STRAIGHT, total_head: 53.000 FEET FT, temp_rating: 150.0 FAHRENHEIT MAXIMUM DEGF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7341, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R130
NSN: 3110-00-155-7341
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
filterNOT INCLUDED
materialSTEEL COMP 1074 OVERALL
body_styleSTRAIGHT THRU
bore_shapeSTRAIGHT
total_head53.000 FEET FT
temp_rating150.0 FAHRENHEIT MAXIMUM DEGF
bore_diameter30.00 MILLIMETERS NOMINAL MM
hole_diameter3.890 INCHES NOMINAL3.890 INCHES NOMINAL IN
mounting_typeBASE
overall_width16.00 MILLIMETERS NOMINAL MM
overall_height0.355 INCHES NOMINAL0.355 INCHES NOMINAL IN
stage_quantity1
NSN3110-00-155-7341
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R130 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL INNER RING
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 30.00 MILLIMETERS NOMINAL MM
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
MATERIALSTEEL ROLLER
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
SURFACE FINISHGROUND
BORE DIAMETER30.00 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL OUTSIDE DIAMETER62.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
OVERALL WIDTH16.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
6RS206Interchangeable
interchangeable cross-reference
interchangeable
AL773-124Interchangeable
interchangeable cross-reference
interchangeable
RS206Interchangeable
interchangeable cross-reference
interchangeable
18081Interchangeable
interchangeable cross-reference
interchangeable
756-6095Interchangeable
interchangeable cross-reference
interchangeable
136021Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R130?
R130 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace R130?
There are 24 known substitutes for R130: 6RS206, AL773-124, RS206 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R130?
R130 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R130

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026