PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 102611307
102611307 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-621-3171, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
102611307
NSN: 5340-00-621-3171
FSC: 5340
CAGE: A0199 — LEONARDO S.P.A. - ELECTRONICS DIVISION - DEFENCE BUSINESS AREA (ITA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.0320 INCHES NOMINAL IN
loop_inside_diameter0.875 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.107 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.889 INCHES NOMINAL IN
NSN5340-00-621-3171
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 102611307 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
•
SURFACE TREATMENT: CADMIUM BAND
•
MATERIAL THICKNESS: 0.0320 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.107 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
LOOP INSIDE DIAMETER: 0.875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OFFSET MOUNT
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
SURFACE TREATMENTCADMIUM BAND
MATERIAL THICKNESS0.0320 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC CUSHION
DISTANCE FROM LOOP CENTER TO TONGUE END1.107 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER0.875 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
OVERALL WIDTH0.500 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
5340PL1524825Upgraded Successor
successor cross-reference
successor
MS21106-16Upgraded Successor
successor cross-reference
successor
MIL-DTL-8603Upgraded Successor
successor cross-reference
successor
AS21919WG40Upgraded Successor
successor cross-reference
successor
5340PL1653549Upgraded Successor
successor cross-reference
successor
MS21919WG40Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 102611307?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102611307?
102611307 is a CLAMP,LOOP.
What parts can replace 102611307?
There are 22 known substitutes for 102611307: 5340PL1524825, MS21106-16, MIL-DTL-8603 and 19 more. Substitute compatibility should be verified for your specific system.
Is 102611307 still available?
102611307 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102611307

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026