PartsTable
Technical Data Sheet
PartsTable / O-RING / 101F705U01
101F705U01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, temp_rating: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, criticality_code_justification: ZZZY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-676-6184, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
101F705U01
NSN: 5331-00-676-6184
FSC: 5331 — O-RING
CAGE: 81412 — TREADWELL CORPORATION (DELAWARE) DBA TREADWELL CORP (USA)
SPECIFICATIONS
materialRUBBER
temp_rating-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL
center_hole_diameter0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
criticality_code_justificationZZZY
material_document_and_classificationE515-8,FSCM 05779 MFR REF SINGLE MATERIAL RESPONSE
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5331-00-676-6184
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 101F705U01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER
•
MATERIAL DOCUMENT AND CLASSIFICATION: E515-8,FSCM 05779 MFR REF SINGLE MATERIAL RESPONSE
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
TEMP RATING: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER
MATERIAL DOCUMENT AND CLASSIFICATIONE515-8,FSCM 05779 MFR REF SINGLE MATERIAL RESPONSE
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
TEMP RATING-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
30504768PC13Interchangeable
interchangeable cross-reference
interchangeable
2-010E515-8Interchangeable
interchangeable cross-reference
interchangeable
ARP568-010E515- 8Interchangeable
interchangeable cross-reference
interchangeable
2-010/E515-80Interchangeable
interchangeable cross-reference
interchangeable
2509084Interchangeable
interchangeable cross-reference
interchangeable
2-010-E0540-80 1W2BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 101F705U01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 101F705U01?
101F705U01 is a O-RING.
What parts can replace 101F705U01?
There are 17 known substitutes for 101F705U01: 30504768PC13, 2-010E515-8, ARP568-010E515- 8 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 101F705U01?
101F705U01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-676-6184. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 101F705U01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026