PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10195-5
10195-5 ✓ Verified by PartsTable
Hama · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

- Simple neoprene sleeve with a modern two-tone design<br>- Water-repellent material that protects against scratches, dirt and moisture<br>- Soft inside lining that protects the sensitive surface of the device This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-1955, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10195-5
NSN: 5305-00-010-1955
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
overall_diameter0.375 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationFAMILY OF HEMTT VEHICLES (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS); 2320-01-304-2277 AND 2320-01-304-2278 PLS (PALLETIZED LOADING SYSTEM)
cross-sectional_shape_styleRECTANGULAR
NSN5305-00-010-1955
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10195-5 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK
•
HEAD DIAMETER: 0.437 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
•
MATERIAL: STEEL OVERALL
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
NONMACHINE THREAD STYLE: WOOD SCREW (TYPE WD)
•
INTERNAL DRIVE STYLE: SLOT
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.242 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.437 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2S STYLE
MATERIALSTEEL OVERALL
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
NONMACHINE THREAD STYLEWOOD SCREW (TYPE WD)
INTERNAL DRIVE STYLESLOT
NONMACHINE NOMINAL THREAD DIAMETER0.242 INCHES IN
FASTENER LENGTH1.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
10195-5Interchangeable
interchangeable cross-reference
interchangeable
5HD335Interchangeable
interchangeable cross-reference
interchangeable
2HK49Interchangeable
interchangeable cross-reference
interchangeable
MODEL 1000 IT3EInterchangeable
interchangeable cross-reference
interchangeable
MODEL 1000 ITEM 3EInterchangeable
interchangeable cross-reference
interchangeable
FFS111STYLE2SInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10195-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10195-5?
10195-5 is a TUBE,CONTROL manufactured by Hama.
What parts can replace 10195-5?
There are 6 known substitutes for 10195-5: 10195-5, 5HD335, 2HK49 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10195-5?
10195-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-1955. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10195-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026