PartsTable
Technical Data Sheet
Download PDF

FFS111STYLE2S — SCREW,WOOD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FFS111STYLE2S: SCREW,WOOD.

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_diameter: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, fastener_length: 1.450 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, special_features: DOUBLE THREAD; FLAT COUNTERFUNK HEAD, SLOTTED DRIVE, countersink_angle: 81.0 DEGREES NOMINAL, surface_treatment: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-010-1929, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS111STYLE2S
NSN: 5305-00-010-1929
NIINs: 000101929, 000101946, 000101954, 000101955, 000101957, 000102139, 000102152, 000102153, 000102155, 000104344, 000112953, 000121418, 000121430, 000121431, 000121433, 000129235, 000129312, 000129444, 000129536, 000129665, 000129880, 000129882, 000129905, 000129909, 000424008, 000424037, 000424039, 000424044, 000424054, 000424056, 000424058, 001753442, 001753451, 001800586, 001885525, 001885543, 002530652, 002530662, 002654371, 002987911, 010174071
FSC: 5305 — Screws
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
head_diameter0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
fastener_length1.450 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
special_featuresDOUBLE THREAD; FLAT COUNTERFUNK HEAD, SLOTTED DRIVE
countersink_angle81.0 DEGREES NOMINAL
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_data1 TYPE AND 2C STYLE
nonmachine_nominal_thread_diameter0.164 INCHES IN
NSN5305-00-010-1929
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS111STYLE2S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
NONMACHINE THREAD STYLE: WOOD SCREW (TYPE WD)
•
HEAD STYLE: FLAT COUNTERSUNK
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
•
INTERNAL DRIVE STYLE: SLOT
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
FASTENER LENGTH0.625 INCHES NOMINAL IN
NONMACHINE THREAD STYLEWOOD SCREW (TYPE WD)
HEAD STYLEFLAT COUNTERSUNK
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2S STYLE
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
MATERIALSTEEL OVERALL
HEAD DIAMETER0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
101929Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy FFS111STYLE2S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS111STYLE2S?
FFS111STYLE2S is a SCREW,WOOD.
What parts can replace FFS111STYLE2S?
There is 1 known substitute for FFS111STYLE2S: 101929. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS111STYLE2S?
FFS111STYLE2S is cataloged in the U.S. Government catalog under NSN 5305-00-010-1929. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS111STYLE2S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.