PartsTable
Technical Data Sheet
Download PDF

10188498 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10188498: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, center_hole_diameter: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, end_item_identification: LOGISTICS SUPPORT VESSEL. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-446-1959, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10188498
NSN: 5331-01-446-1959
FSC: 5331 — O-ring
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
center_hole_diameter0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identificationLOGISTICS SUPPORT VESSEL
NSN5331-01-446-1959
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10188498 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 3
AS3209-008Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SAE-AMS7276Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AS3209-007Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10188498?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10188498?
10188498 is a O-RING.
What parts can replace 10188498?
There are 3 known substitutes for 10188498: AS3209-008, SAE-AMS7276, AS3209-007. Substitute compatibility should be verified for your specific system.
What is the NSN for 10188498?
10188498 is cataloged in the U.S. Government catalog under NSN 5331-01-446-1959. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10188498