10165787 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

10165787: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, load_rating: 8.000 POUNDS NOMINAL LBS, bore_diameter: 0.312 INCHES NOMINAL IN, inside_diameter: 0.216 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN, style_designator: CYLINDRICAL. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-405-7582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10165787

NSN: 5360-00-405-7582
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)

SPECIFICATIONS

material	STEEL COMP 302 OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
load_rating	8.000 POUNDS NOMINAL LBS
bore_diameter	0.312 INCHES NOMINAL IN
coil_quantity	6
inside_diameter	0.216 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
style_designator	CYLINDRICAL
surface_treatment	PASSIVATE OVERALL
spring_free_length	0.560 INCHES NOMINAL IN
spring_solid_length	0.248 INCHES NOMINAL IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
spring_deflection_rate	32.500 POUNDS PER INCH NOMINAL LBS
NSN	5360-00-405-7582

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.292 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN

•

LOAD RATING: 8.000 POUNDS NOMINAL LBS

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

SPRING SOLID LENGTH: 0.248 INCHES NOMINAL IN

•

STYLE DESIGNATOR: CYLINDRICAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OR AMS 5688 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 0.560 INCHES NOMINAL IN

•

SPRING DEFLECTION RATE: 32.500 POUNDS PER INCH NOMINAL LBS

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.292 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
LOAD RATING	8.000 POUNDS NOMINAL LBS
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
SPRING SOLID LENGTH	0.248 INCHES NOMINAL IN
STYLE DESIGNATOR	CYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OR AMS 5688 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	0.560 INCHES NOMINAL IN
SPRING DEFLECTION RATE	32.500 POUNDS PER INCH NOMINAL LBS
INSIDE DIAMETER	0.216 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
SPRING LENGTH UNDER LOAD	0.310 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 2

QQ-P-35Reference document

Same NSN cross-reference

Reference document — Identification reference

ASTM A313Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 10165787?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10165787?

10165787 is a SPRING,HELICAL,COMPRESSION.

What parts can replace 10165787?

There are 2 known substitutes for 10165787: QQ-P-35, ASTM A313. Substitute compatibility should be verified for your specific system.

What is the NSN for 10165787?

10165787 is cataloged in the U.S. Government catalog under NSN 5360-00-405-7582. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10165787 — SPRING,HELICAL,COMPRESSION

Request a Quote — 10165787