QQ-P-35 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

QQ-P-35: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, thickness: 0.190 INCHES NOMINAL IN, load_rating: 8.000 POUNDS NOMINAL LBS, bore_diameter: 0.312 INCHES NOMINAL IN, hole_diameter: 0.515 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-405-7582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

QQ-P-35

NSN: 5360-00-405-7582
NIINs: 004057582, 005676766
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)

SPECIFICATIONS

material	STEEL COMP 303 OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
thickness	0.190 INCHES NOMINAL IN
load_rating	8.000 POUNDS NOMINAL LBS
bore_diameter	0.312 INCHES NOMINAL IN
coil_quantity	6
hole_diameter	0.515 INCHES NOMINAL IN
inside_diameter	0.216 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
overall_diameter	1.000 INCHES NOMINAL IN
style_designator	CYLINDRICAL
surface_treatment	PASSIVATE OVERALL
spring_free_length	0.560 INCHES NOMINAL IN
NSN	5360-00-405-7582

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.292 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN

•

LOAD RATING: 8.000 POUNDS NOMINAL LBS

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

SPRING SOLID LENGTH: 0.248 INCHES NOMINAL IN

•

STYLE DESIGNATOR: CYLINDRICAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OR AMS 5688 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 0.560 INCHES NOMINAL IN

•

SPRING DEFLECTION RATE: 32.500 POUNDS PER INCH NOMINAL LBS

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.292 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
LOAD RATING	8.000 POUNDS NOMINAL LBS
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
SPRING SOLID LENGTH	0.248 INCHES NOMINAL IN
STYLE DESIGNATOR	CYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OR AMS 5688 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	0.560 INCHES NOMINAL IN
SPRING DEFLECTION RATE	32.500 POUNDS PER INCH NOMINAL LBS
INSIDE DIAMETER	0.216 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
SPRING LENGTH UNDER LOAD	0.310 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 1

ASTM A313Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy QQ-P-35?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is QQ-P-35?

QQ-P-35 is a SPRING,HELICAL,COMPRESSION.

What parts can replace QQ-P-35?

There is 1 known substitute for QQ-P-35: ASTM A313. Substitute compatibility should be verified for your specific system.

What is the NSN for QQ-P-35?

QQ-P-35 is cataloged in the U.S. Government catalog under NSN 5360-00-405-7582. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

QQ-P-35 — SPRING,HELICAL,COMPRESSION

Request a Quote — QQ-P-35