PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10132484-2
10132484-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.128 INCHES NOMINAL IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL, overall_width: 0.281 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.032 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-7273, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10132484-2
NSN: 5340-00-598-7273
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
diameter0.128 INCHES NOMINAL IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
overall_width0.281 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.094 INCHES NOMINAL IN
material_document_and_classificationASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.431 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.259 INCHES NOMINAL IN
NSN5340-00-598-7273
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10132484-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.094 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.259 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.431 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.094 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
OVERALL WIDTH0.281 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.259 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.431 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.128 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
044295Upgraded Successor
successor cross-reference
successor
3-32-2Upgraded Successor
successor cross-reference
successor
72-6970-297Interchangeable
interchangeable cross-reference
interchangeable
322KInterchangeable
interchangeable cross-reference
interchangeable
51-601-978-022Interchangeable
interchangeable cross-reference
interchangeable
31322TYPEDInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10132484-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10132484-2?
10132484-2 is a CLAMP,LOOP.
What parts can replace 10132484-2?
There are 24 known substitutes for 10132484-2: 044295, 3-32-2, 72-6970-297 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10132484-2?
10132484-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-7273. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10132484-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026