PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 044295
044295 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.128 INCHES NOMINAL IN, material: PLASTIC OVERALL, overall_width: 0.280 INCHES NOMINAL IN, style_designator: CENTER MOUNT, material_thickness: 0.032 INCHES NOMINAL IN, loop_inside_diameter: 0.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-149-3526, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
044295
NSN: 5340-01-149-3526
FSC: 5340
CAGE: 89305 — SIMMONDS PRECISION PRODUCTS INC (USA)
SPECIFICATIONS
diameter0.128 INCHES NOMINAL IN
materialPLASTIC OVERALL
overall_width0.280 INCHES NOMINAL IN
style_designatorCENTER MOUNT
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.094 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.429 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.259 INCHES NOMINAL IN
NSN5340-01-149-3526
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 044295 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.429 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.259 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL: PLASTIC OVERALL
•
DIAMETER: 0.128 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.094 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END0.429 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.259 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
MATERIALPLASTIC OVERALL
DIAMETER0.128 INCHES NOMINAL IN
OVERALL WIDTH0.280 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.094 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
10132484-2Upgraded Successor
successor cross-reference
successor
3-32-2Upgraded Successor
successor cross-reference
successor
F2NY-093BKUpgraded Successor
successor cross-reference
successor
72-6970-297Interchangeable
interchangeable cross-reference
interchangeable
322KInterchangeable
interchangeable cross-reference
interchangeable
51-601-978-022Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 044295?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 044295?
044295 is a CLAMP,LOOP.
What parts can replace 044295?
There are 18 known substitutes for 044295: 10132484-2, 3-32-2, F2NY-093BK and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 044295?
044295 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-149-3526. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 044295

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026