PartsTable
Technical Data Sheet
PartsTable / O-RING / 10117042
10117042 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.262 INCHES NOMINAL IN, center_hole_diameter: 0.974 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-103-1512, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117042
NSN: 5331-00-103-1512
FSC: 5331 — O-RING
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter1.262 INCHES NOMINAL IN
center_hole_diameter0.974 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-103-1512
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117042 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.974 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 1.262 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.974 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER1.262 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
4680-214Interchangeable
interchangeable cross-reference
interchangeable
772-8329001 ITEM NO 2Interchangeable
interchangeable cross-reference
interchangeable
10159954Interchangeable
interchangeable cross-reference
interchangeable
AS3085-214Interchangeable
interchangeable cross-reference
interchangeable
AS3209-214Interchangeable
interchangeable cross-reference
interchangeable
SAE-AMS7276Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10117042?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117042?
10117042 is a O-RING.
What parts can replace 10117042?
There are 8 known substitutes for 10117042: 4680-214, 772-8329001 ITEM NO 2, 10159954 and 5 more. Substitute compatibility should be verified for your specific system.
Is 10117042 still available?
10117042 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117042

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026