PartsTable
Technical Data Sheet
Download PDF

10114757 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10114757: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, thread_length: 0.089 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321, fastener_length: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-964-7369, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10114757
NSN: 5305-00-964-7369
FSC: 5305 — Screws
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
thread_length0.089 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321
fastener_length0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-964-7369
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10114757 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.089 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
THREAD LENGTH0.089 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
SUBSTITUTES & CROSS-REFERENCES 8
947575-1202Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FF-S-92Reference document
Same NSN cross-reference
Reference document — Identification reference
722-016-005Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
418736-12Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2504188-58Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
947575-1201Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10114757?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10114757?
10114757 is a SCREW,MACHINE.
What parts can replace 10114757?
There are 8 known substitutes for 10114757: 947575-1202, FF-S-92, 722-016-005 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10114757?
10114757 is cataloged in the U.S. Government catalog under NSN 5305-00-964-7369. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10114757

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.