PartsTable
Technical Data Sheet
Download PDF

1011401 — CUSHION,HEADREST,AIRCRAFT

✓ Government record, cited
3M · ORING SEAL
PRODUCT OVERVIEW

1011401: CUSHION,HEADREST,AIRCRAFT.

The CUSHION,HEADREST,AIRCRAFT is a 3M industrial component. Key specifications include end_item_identification: 2330-01-534-4570, part_name_assigned_by_controlling_agency: SEAT,AXLE. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-599-2831, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1011401
NSN: 5331-00-599-2831
NIINs: 005992831, 013702417, 015865863
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
end_item_identification2330-01-534-4570
part_name_assigned_by_controlling_agencySEAT,AXLE
NSN5331-00-599-2831
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1011401 MFR: 3M ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -103.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
HARDNESS RATING: 50.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS
TEMP RATING-103.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING50.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
SUBSTITUTES & CROSS-REFERENCES 10
MS90064-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
ARP568-013MILP5 516-70DURMReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AA55549-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
58-013-21Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
871013Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
PRP013-11505Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 1011401?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1011401?
1011401 is a CUSHION,HEADREST,AIRCRAFT manufactured by 3M.
What parts can replace 1011401?
There are 10 known substitutes for 1011401: MS90064-1, ARP568-013MILP5 516-70DURM, AA55549-10 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1011401?
1011401 is cataloged in the U.S. Government catalog under NSN 5331-00-599-2831. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1011401