PartsTable
Technical Data Sheet
Download PDF

871013 — O-RING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

871013: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include special_features: CANCELLOUS BONE SCREW; 4.0 MM BY 13 MM; TITANIUM; FOR USE W/ANTERIOR CERVICAL, THORACIC, LUMBAR FIXATION PLATE SYSTEM MM, part_name_assigned_by_controlling_agency: SCREW BONE CANCELLOUS BONE 4.0MM X 13MM TITANIUM FIXATION SYSTEM MM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-497-3840, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
871013
NSN: 5310-00-497-3840
NIINs: 004973840, 005992831, 012823401, 014209874
FSC: 5310 — Nuts and Washers
CAGE: F1688 — GOODRICH ACTUATION SYSTEMS SAS (FRA)
SPECIFICATIONS
special_featuresCANCELLOUS BONE SCREW; 4.0 MM BY 13 MM; TITANIUM; FOR USE W/ANTERIOR CERVICAL, THORACIC, LUMBAR FIXATION PLATE SYSTEM MM
part_name_assigned_by_controlling_agencySCREW BONE CANCELLOUS BONE 4.0MM X 13MM TITANIUM FIXATION SYSTEM MM
NSN5310-00-497-3840
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 871013 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.075 INCHES MAXIMUM IN
•
NUT LENGTH: 1.297 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
PLATE WIDTH: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MOUNTING HOLE DIAMETER: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.075 INCHES MAXIMUM IN
NUT LENGTH1.297 INCHES MAXIMUM IN
THREAD SERIESUNF
PLATE WIDTH0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MOUNTING HOLE DIAMETER0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
68NA1-064Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN366DF624Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 871013?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 871013?
871013 is a O-RING.
What parts can replace 871013?
There are 2 known substitutes for 871013: 68NA1-064, AN366DF624. Substitute compatibility should be verified for your specific system.
What is the NSN for 871013?
871013 is cataloged in the U.S. Government catalog under NSN 5310-00-497-3840. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 871013

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.