PartsTable
Technical Data Sheet
Download PDF

10113305 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10113305: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES NOMINAL IN, length: 0.360 INCHES MAXIMUM IN, material: COPPER ALLOY 172 OR COPPER ALLOY 170 OVERALL, hole_diameter: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, overall_height: 0.400 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-394-3561, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10113305
NSN: 5340-01-394-3561
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
width0.500 INCHES NOMINAL IN
length0.360 INCHES MAXIMUM IN
materialCOPPER ALLOY 172 OR COPPER ALLOY 170 OVERALL
hole_diameter0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
hole_quantity2
overall_height0.400 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
style_designatorSTANDOFF
surface_treatmentTIN OVERALL
material_thickness0.016 INCHES NOMINAL IN
loop/holding_dimension0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
specification/standard_data80205-NAS1464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5340-01-394-3561
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10113305 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.360 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-T-10727 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: STANDOFF
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B194 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.400 INCHES MAXIMUM IN
LENGTH0.360 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-T-10727 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
STYLE DESIGNATORSTANDOFF
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B194 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA80205-NAS1464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
DISTANCE FROM LOOP CENTER TO END0.350 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
100H112PC10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NAS1464Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10113305?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10113305?
10113305 is a CLIP,SPRING TENSION.
What parts can replace 10113305?
There are 2 known substitutes for 10113305: 100H112PC10, NAS1464. Substitute compatibility should be verified for your specific system.
What is the NSN for 10113305?
10113305 is cataloged in the U.S. Government catalog under NSN 5340-01-394-3561. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10113305

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.