The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES NOMINAL IN, length: 0.360 INCHES MAXIMUM IN, material: COPPER ALLOY 172 OR COPPER ALLOY 170 OVERALL, hole_diameter: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, overall_height: 0.400 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-01-394-3561, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
100H112PC10
NSN:5340-01-394-3561 FSC:5340 — Hardware, Commercial CAGE:04804 — NORTHROP GRUMMAN SYSTEMS CORPORATION DIV MARINE SYSTEMS (USA)
SPECIFICATIONS
width
0.500 INCHES NOMINAL IN
length
0.360 INCHES MAXIMUM IN
material
COPPER ALLOY 172 OR COPPER ALLOY 170 OVERALL
hole_diameter
0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
hole_quantity
2
overall_height
0.400 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
style_designator
STANDOFF
surface_treatment
TIN OVERALL
material_thickness
0.016 INCHES NOMINAL IN
loop/holding_dimension
0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
specification/standard_data
80205-NAS1464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN
5340-01-394-3561
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.360 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-T-10727 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: STANDOFF
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B194 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.400 INCHES MAXIMUM IN
LENGTH
0.360 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-T-10727 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHOD
UNTHREADED HOLE(S)
STYLE DESIGNATOR
STANDOFF
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM B194 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION
0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.016 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA
80205-NAS1464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
DISTANCE FROM LOOP CENTER TO END
0.350 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100H112PC10?
100H112PC10 is a CLIP,SPRING TENSION.
What parts can replace 100H112PC10?
There are 2 known substitutes for 100H112PC10: 10113305, NAS1464. Substitute compatibility should be verified for your specific system.
What is the NSN for 100H112PC10?
100H112PC10 is cataloged in the U.S. Government catalog under NSN 5340-01-394-3561. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.