PartsTable
Technical Data Sheet
PartsTable / O-RING / 101-29000
101-29000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN, center_hole_diameter: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN, cross-sectional_height: 0.072 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-088-8643, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
101-29000
NSN: 5331-01-088-8643
FSC: 5331 — O-RING
CAGE: 33269 — AIRCRAFT WHEEL AND BRAKE, LLC DBA CLEVELAND WHEEL AND BRAKE SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
center_hole_diameter0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
cross-sectional_height0.072 INCHES NOMINAL IN
NSN5331-01-088-8643
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 101-29000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.072 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.072 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
1KK528Interchangeable
interchangeable cross-reference
interchangeable
AS568A-904MILP2 5732Interchangeable
interchangeable cross-reference
interchangeable
3-4 N304-75Interchangeable
interchangeable cross-reference
interchangeable
M83248/2-904Interchangeable
interchangeable cross-reference
interchangeable
M83248/-904Interchangeable
interchangeable cross-reference
interchangeable
431385 ITEM 41Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 101-29000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 101-29000?
101-29000 is a O-RING.
What parts can replace 101-29000?
There are 14 known substitutes for 101-29000: 1KK528, AS568A-904MILP2 5732, 3-4 N304-75 and 11 more. Substitute compatibility should be verified for your specific system.
Is 101-29000 still available?
101-29000 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 101-29000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026