PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100A032763
100A032763 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OVERALL, head_style: ROUND, head_height: 0.069 INCHES MAXIMUM IN, head_diameter: 0.146 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN, fastener_length: 0.188 INCHES NOMINAL IN, internal_drive_style: CROSS RECESS TYPE 1. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-146-2533, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100A032763
NSN: 5305-01-146-2533
FSC: 5305
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
head_styleROUND
head_height0.069 INCHES MAXIMUM IN
head_diameter0.146 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
fastener_length0.188 INCHES NOMINAL IN
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleWIDE FLUTE (TYPE H OR BT)
minimum_tensile_strength90000 POUNDS PER SQUARE INCH LBS
nonmachine_nominal_thread_diameter0.086 INCHES IN
NSN5305-01-146-2533
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 100A032763 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM TENSILE STRENGTH: 90000 POUNDS PER SQUARE INCH LBS
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
MATERIAL: STEEL COMP 410 OVERALL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD HEIGHT: 0.069 INCHES MAXIMUM IN
•
HEAD STYLE: ROUND
•
NONMACHINE THREAD STYLE: WIDE FLUTE (TYPE H OR BT)
•
HEAD DIAMETER: 0.146 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM TENSILE STRENGTH90000 POUNDS PER SQUARE INCH LBS
NONMACHINE NOMINAL THREAD DIAMETER0.086 INCHES IN
MATERIALSTEEL COMP 410 OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD HEIGHT0.069 INCHES MAXIMUM IN
HEAD STYLEROUND
NONMACHINE THREAD STYLEWIDE FLUTE (TYPE H OR BT)
HEAD DIAMETER0.146 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
FASTENER LENGTH0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
NASM51861Interchangeable
interchangeable cross-reference
interchangeable
80105Interchangeable
interchangeable cross-reference
interchangeable
MS24617-55Interchangeable
interchangeable cross-reference
interchangeable
92662Interchangeable
interchangeable cross-reference
interchangeable
92733Interchangeable
interchangeable cross-reference
interchangeable
FF-S-107 TYABInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100A032763?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100A032763?
100A032763 is a SCREW,TAPPING.
What parts can replace 100A032763?
There are 20 known substitutes for 100A032763: NASM51861, 80105, MS24617-55 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100A032763?
100A032763 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-146-2533. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100A032763

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026