PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10086631
10086631 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 1.000 INCHES NOMINAL IN, style_designator: SINGLE LOOP, surface_treatment: CADMIUM OR ZINC BAND, material_thickness: 0.050 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-087-7486, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10086631
NSN: 5340-00-087-7486
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
diameter0.406 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
overall_width1.000 INCHES NOMINAL IN
style_designatorSINGLE LOOP
surface_treatmentCADMIUM OR ZINC BAND
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter1.000 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.750 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.250 INCHES NOMINAL IN
NSN5340-00-087-7486
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10086631 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
DIAMETER: 0.406 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: STEEL BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR ZINC BAND
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER1.000 INCHES NOMINAL IN
DIAMETER0.406 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALSTEEL BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.250 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC BAND
DISTANCE FROM LOOP CENTER TO TONGUE END1.750 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC CUSHION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
15434Upgraded Successor
successor cross-reference
successor
DS-930651Interchangeable
interchangeable cross-reference
interchangeable
107460Interchangeable
interchangeable cross-reference
interchangeable
5303-812Interchangeable
interchangeable cross-reference
interchangeable
B26-4Interchangeable
interchangeable cross-reference
interchangeable
55525Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10086631?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10086631?
10086631 is a CLAMP,LOOP.
What parts can replace 10086631?
There are 13 known substitutes for 10086631: 15434, DS-930651, 107460 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10086631?
10086631 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-087-7486. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10086631

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026