PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10049313-1
10049313-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 BAND, overall_width: 0.210 INCHES NOMINAL IN, style_designator: CENTER MOUNT, surface_treatment: PASSIVATE BAND, material_thickness: 0.046 INCHES NOMINAL IN, nominal_thread_size: 0.086 INCHES IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-073-3107, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10049313-1
NSN: 5340-00-073-3107
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 302 BAND
overall_width0.210 INCHES NOMINAL IN
style_designatorCENTER MOUNT
surface_treatmentPASSIVATE BAND
material_thickness0.046 INCHES NOMINAL IN
nominal_thread_size0.086 INCHES IN
loop_inside_diameter1.059 INCHES NOMINAL IN
thread_quantity_per_inch56
distance_from_loop_center_to_tongue_end0.789 INCHES NOMINAL IN
distance_from_loop_center_to_short_tongue_end0.742 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.630 INCHES NOMINAL IN
NSN5340-00-073-3107
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10049313-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.046 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
SURFACE TREATMENT: PASSIVATE BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.630 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 302 BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.789 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.086 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.210 INCHES NOMINAL IN
MATERIAL THICKNESS0.046 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
SURFACE TREATMENTPASSIVATE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.630 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.789 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.086 INCHES IN
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END0.742 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.059 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
48637Interchangeable
interchangeable cross-reference
interchangeable
3238996Interchangeable
interchangeable cross-reference
interchangeable
AN3156-3Interchangeable
interchangeable cross-reference
interchangeable
56-3Interchangeable
interchangeable cross-reference
interchangeable
PR406-3Interchangeable
interchangeable cross-reference
interchangeable
50222Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10049313-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10049313-1?
10049313-1 is a CLAMP,LOOP.
What parts can replace 10049313-1?
There are 19 known substitutes for 10049313-1: 48637, 3238996, AN3156-3 and 16 more. Substitute compatibility should be verified for your specific system.
Is 10049313-1 still available?
10049313-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10049313-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026