PartsTable
Technical Data Sheet
Download PDF

100-200-10A-10 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

100-200-10A-10: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 0.660 INCHES NOMINAL IN, material: STEEL COMP 304 OVERALL, hole_diameter: 0.136 INCHES NOMINAL IN, overall_height: 0.760 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-855-7743, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100-200-10A-10
NSN: 5340-00-855-7743
FSC: 5340 — Hardware, Commercial
CAGE: 99378 — ATLEE OF DELAWARE, INCORPORATED (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length0.660 INCHES NOMINAL IN
materialSTEEL COMP 304 OVERALL
hole_diameter0.136 INCHES NOMINAL IN
overall_height0.760 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.014 INCHES NOMINAL IN
loop/holding_dimension0.625 INCHES NOMINAL IN
distance_from_loop_center_to_end0.422 INCHES NOMINAL IN
material_document_and_classificationQQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-855-7743
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100-200-10A-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.660 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.625 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.014 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.422 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
WIDTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.760 INCHES NOMINAL IN
LENGTH0.660 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.014 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.422 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH1.000 INCHES NOMINAL IN
MATERIALSTEEL COMP 304 OVERALL
HOLE DIAMETER0.136 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
577R468H34Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
577R468Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
6016-54AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 100-200-10A-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-200-10A-10?
100-200-10A-10 is a CLIP,SPRING TENSION.
What parts can replace 100-200-10A-10?
There are 3 known substitutes for 100-200-10A-10: 577R468H34, 577R468, 6016-54A. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-200-10A-10?
100-200-10A-10 is cataloged in the U.S. Government catalog under NSN 5340-00-855-7743. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-200-10A-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.