PartsTable
Technical Data Sheet
Download PDF

577R468 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

577R468: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, length: 0.340 INCHES NOMINAL IN, material: STEEL COMP 304 OVERALL, hole_diameter: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, overall_height: 0.378 INCHES MINIMUM AND 0.382 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-00-052-6727, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
577R468
NSN: 5340-00-052-6727
NIINs: 000526727, 000526729, 000609720, 000609721, 000613324, 008557743, 009202730, 009207276, 009207278, 009207282, 009353949, 010194335, 012760577
FSC: 5340 — Hardware, Commercial
CAGE: 97942 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
width0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
length0.340 INCHES NOMINAL IN
materialSTEEL COMP 304 OVERALL
hole_diameter0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
overall_height0.378 INCHES MINIMUM AND 0.382 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
special_features4 SLOTS ALONG WIDTH
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.011 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
loop/holding_dimension0.266 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.2075 INCHES NOMINAL IN
material_document_and_classificationQQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-052-6727
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 577R468 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.780 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.516 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
WIDTH: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.930 INCHES NOMINAL IN
LENGTH0.780 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.516 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH1.500 INCHES NOMINAL IN
MATERIALSTEEL COMP 304 OVERALL
HOLE DIAMETER0.136 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
577R468H26Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 577R468?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 577R468?
577R468 is a CLIP,SPRING TENSION.
What parts can replace 577R468?
There is 1 known substitute for 577R468: 577R468H26. Substitute compatibility should be verified for your specific system.
What is the NSN for 577R468?
577R468 is cataloged in the U.S. Government catalog under NSN 5340-00-052-6727. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 577R468

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.