10-91-1201 — CONNECTOR,RECEPTACLE,ELECTRICAL

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

10-91-1201: CONNECTOR,RECEPTACLE,ELECTRICAL.

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include height: 1.380 INCHES NOMINAL IN, diameter: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, material: STEEL COMP 1025 OVERALL, body_style: RIGHT ANGLE TYPE, head_style: THUMB NO. 4, head_width: 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5315-00-168-2808, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10-91-1201

NSN: 5315-00-168-2808
NIINs: 001682808, 012518042
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)

SPECIFICATIONS

height	1.380 INCHES NOMINAL IN
diameter	0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
material	STEEL COMP 1025 OVERALL
body_style	RIGHT ANGLE TYPE
head_style	THUMB NO. 4
head_width	0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
body_height	0.250 INCHES NOMINAL IN
overall_width	0.600 INCHES NOMINAL IN
chamfer_length	0.090 INCHES NOMINAL IN
overall_length	0.990 INCHES NOMINAL IN
special_features	0.515 IN. DIA HOLE DRILLED THRU HEAD IN
style_designator	STRAIGHT
NSN	5315-00-168-2808

COMPONENT DIAGRAM

KEY FEATURES

•

CHAMFER LENGTH: 0.090 INCHES NOMINAL IN

•

HOLE ARRANGEMENT STYLE: DRILLED THRU HEAD

•

HEAD WIDTH: 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN

•

UNDER HEAD LENGTH: 6.370 INCHES NOMINAL IN

•

PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL

•

FIRST HOLE DIAMETER: 0.515 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: STRAIGHT

•

DIAMETER: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

CHAMFER LENGTH	0.090 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLE	DRILLED THRU HEAD
HEAD WIDTH	0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
UNDER HEAD LENGTH	6.370 INCHES NOMINAL IN
PIN CHAMFER ANGLE	45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER	0.515 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
STYLE DESIGNATOR	STRAIGHT
DIAMETER	0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
HEAD STYLE	THUMB NO. 4
HEIGHT	1.380 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 2

CS-2300-0001 REV BReference document

Same NSN cross-reference

Reference document — Drawing number reference only

10911201 REV DReference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 10-91-1201?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10-91-1201?

10-91-1201 is a CONNECTOR,RECEPTACLE,ELECTRICAL.

What parts can replace 10-91-1201?

There are 2 known substitutes for 10-91-1201: CS-2300-0001 REV B, 10911201 REV D. Substitute compatibility should be verified for your specific system.

What is the NSN for 10-91-1201?

10-91-1201 is cataloged in the U.S. Government catalog under NSN 5315-00-168-2808. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10-91-1201 — CONNECTOR,RECEPTACLE,ELECTRICAL

Request a Quote — 10-91-1201