PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10-36675-28
10-36675-28 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include end_item_identification: RQ-4A A. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-376-2241, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10-36675-28
NSN: 5330-00-376-2241
FSC: 5330
CAGE: 77820 — AMPHENOL CORP DIV AMPHENOL AEROSPACE OPERATIONS (USA)
SPECIFICATIONS
end_item_identificationRQ-4A A
NSN5330-00-376-2241
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10-36675-28 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HARDNESS RATING: 50.0 SHORE DUROMETER A NOMINAL OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.563 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE DIAMETER: 1.750 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.218 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 30.0 POUNDS PER SQUARE INCH (PSI) LBS
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HARDNESS RATING50.0 SHORE DUROMETER A NOMINAL OVERALL
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.563 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE DIAMETER1.750 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.218 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING30.0 POUNDS PER SQUARE INCH (PSI) LBS
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
OVERALL WIDTH2.000 INCHES MINIMUM AND 2.016 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
36071Interchangeable
px2-300d 0TB
interchangeable
A042036071Interchangeable
interchangeable cross-reference
interchangeable
811GU0132Interchangeable
interchangeable cross-reference
interchangeable
5330PL0951168Interchangeable
interchangeable cross-reference
interchangeable
10-36675-28Interchangeable
interchangeable cross-reference
interchangeable
204268G1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10-36675-28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-36675-28?
10-36675-28 is a GASKET.
What parts can replace 10-36675-28?
There are 14 known substitutes for 10-36675-28: 36071, A042036071, 811GU0132 and 11 more. Substitute compatibility should be verified for your specific system.
Is 10-36675-28 still available?
10-36675-28 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10-36675-28

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026