PartsTable / COMPONENT / 10-28822
10-28822
✓ Verified by PartsTable
3M · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The ENGINE,GASOLINE is a 3M industrial component. Key specifications include diameter: 0.281 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN, material: STEEL BAND, overall_width: 0.625 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-239-1361, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
10-28822
NSN: 5340-00-239-1361 FSC: 5340 CAGE: 0PYA5 — CONTINENTAL AEROSPACE TECHNOLOGIES, INC. (USA)
SPECIFICATIONS
diameter 0.281 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN material STEEL BAND overall_width 0.625 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED surface_treatment CADMIUM BAND material_thickness 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN loop_inside_diameter 0.516 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 1.001 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.688 INCHES NOMINAL IN NSN 5340-00-239-1361
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 10-28822
MFR: 3M
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• DIAMETER: 0.281 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN
• MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
• SURFACE TREATMENT: CADMIUM BAND
• TONGUE HOLE TYPE: ROUND, UNTHREADED
• LOOP INSIDE DIAMETER: 0.516 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER 0.281 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN MATERIAL THICKNESS 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN MATERIAL STEEL BAND SURFACE TREATMENT CADMIUM BAND OVERALL WIDTH 0.625 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, UNTHREADED LOOP INSIDE DIAMETER 0.516 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.688 INCHES NOMINAL IN STYLE DESIGNATOR SINGLE LOOP DISTANCE FROM LOOP CENTER TO TONGUE END 1.001 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
86707 Upgraded Successor successor cross-reference
successor
20298 Interchangeable interchangeable cross-reference
interchangeable
3990332 Interchangeable interchangeable cross-reference
interchangeable
5647 Interchangeable interchangeable cross-reference
interchangeable
82282 Interchangeable interchangeable cross-reference
interchangeable
D168403 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 10-28822?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10-28822?
10-28822 is a ENGINE,GASOLINE manufactured by 3M.
What parts can replace 10-28822?
There are 16 known substitutes for 10-28822: 86707, 20298, 3990332 and 13 more. Substitute compatibility should be verified for your specific system.
Is 10-28822 still available?
10-28822 is currently cancelled.
Request a Quote — 10-28822