PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-19914
1-19914 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING FRONT is a Hama industrial component. Key specifications include general_characteristics_item_description: MATL CRES 303 QQ&S&764,LG 0.590 IN,OD 0.422 IN,ID 0.117 IN IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-004-3210, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-19914
NSN: 5330-00-004-3210
FSC: 5330
CAGE: 88807 — NEAC COMPRESSOR SERVICE USA INC (USA)
SPECIFICATIONS
general_characteristics_item_descriptionMATL CRES 303 QQ&S&764,LG 0.590 IN,OD 0.422 IN,ID 0.117 IN IN
NSN5330-00-004-3210
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-19914 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 0.938 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.007 INCHES MINIMUM AND 0.010 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.156 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: PAPER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER0.938 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.007 INCHES MINIMUM AND 0.010 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.156 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIALPAPER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
119914Interchangeable
interchangeable cross-reference
interchangeable
8331232Interchangeable
interchangeable cross-reference
interchangeable
199141Interchangeable
interchangeable cross-reference
interchangeable
SD-7Interchangeable
interchangeable cross-reference
interchangeable
CVC PROJECTInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-19914?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-19914?
1-19914 is a CLIP,SPRING FRONT manufactured by Hama.
What parts can replace 1-19914?
There are 5 known substitutes for 1-19914: 119914, 8331232, 199141 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-19914?
1-19914 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-004-3210. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-19914

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026