PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 199141
199141 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

DRIVE,ENGINE,ELECTRICAL STARTER. Key specifications include width: 24.000 INCHES NOMINAL IN, length: 30.000 INCHES NOMINAL IN, material: PLASTIC POLYESTER, film_type: STILL PICTURE, base_color: CLEAR, usage_form: SHEET. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-004-3210, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
199141
NSN: 5330-00-004-3210
FSC: 5330
CAGE: 88807 — NEAC COMPRESSOR SERVICE USA INC (USA)
SPECIFICATIONS
width24.000 INCHES NOMINAL IN
length30.000 INCHES NOMINAL IN
materialPLASTIC POLYESTER
film_typeSTILL PICTURE
base_colorCLEAR
usage_formSHEET
film_subtypeDIRECT POSITIVE
emulsion_typeBLACK AND WHITE
special_featuresHIGH CONTRAST, RAPID ACCESS OR LITHO PROCESSING
precious_materialSILVER
reproduction_typePOSITIVE
emulsion_sensitivityARTIFICIAL LIGHT
NSN5330-00-004-3210
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 199141 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 0.938 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.007 INCHES MINIMUM AND 0.010 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.156 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: PAPER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER0.938 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.007 INCHES MINIMUM AND 0.010 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.156 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIALPAPER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
119914Interchangeable
interchangeable cross-reference
interchangeable
8331232Interchangeable
interchangeable cross-reference
interchangeable
199141Interchangeable
interchangeable cross-reference
interchangeable
SD-7Interchangeable
interchangeable cross-reference
interchangeable
CVC PROJECTInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 199141?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 199141?
199141 is a DRIVE,ENGINE,ELECTRICAL STARTER.
What parts can replace 199141?
There are 5 known substitutes for 199141: 119914, 8331232, 199141 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 199141?
199141 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-004-3210. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 199141

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026