PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1-0400-0448
1-0400-0448 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, knuckle_type: FRICTION, pin_diameter: 0.080 INCHES NOMINAL IN, overall_length: 96.000 INCHES NOMINAL IN, knuckle_quantity: 384, performance_type: NOT RATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-236-4766, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1-0400-0448
NSN: 5340-01-236-4766
FSC: 5340
CAGE: 09808 — STOCKER HINGE MFG CO (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
knuckle_typeFRICTION
pin_diameter0.080 INCHES NOMINAL IN
overall_length96.000 INCHES NOMINAL IN
knuckle_quantity384
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
style_designatorBUTT
material_thickness0.040 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
pin_center_to_body_edge_distance0.531 INCHES NOMINAL IN
NSN5340-01-236-4766
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1-0400-0448 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KNUCKLE TYPE: FRICTION
•
PIN REMOVABILITY: NONREMOVABLE
•
PIN DIAMETER: 0.080 INCHES NOMINAL IN
•
PERFORMANCE TYPE: NOT RATED
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
KNUCKLE QUANTITY: 384
•
PIN CENTER TO BODY EDGE DISTANCE: 0.531 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
KNUCKLE TYPEFRICTION
PIN REMOVABILITYNONREMOVABLE
PIN DIAMETER0.080 INCHES NOMINAL IN
PERFORMANCE TYPENOT RATED
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
KNUCKLE QUANTITY384
PIN CENTER TO BODY EDGE DISTANCE0.531 INCHES NOMINAL IN
OVERALL LENGTH96.000 INCHES NOMINAL IN
STYLE DESIGNATORBUTT
MATERIALUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
PW214Upgraded Successor
successor cross-reference
successor
50B17Upgraded Successor
successor cross-reference
successor
172540Upgraded Successor
successor cross-reference
successor
103893Interchangeable
interchangeable cross-reference
interchangeable
8HB997Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1-0400-0448?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-0400-0448?
1-0400-0448 is a HINGE,BUTT.
What parts can replace 1-0400-0448?
There are 5 known substitutes for 1-0400-0448: PW214, 50B17, 172540 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1-0400-0448?
1-0400-0448 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-236-4766. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1-0400-0448

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026