Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
FRAME SECTION,STRUCTURAL,VEHICUL. Key specifications include width: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, length: 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.1000 INCHES MINIMUM AND 0.1060 INCHES MAXIMUM IN, overall_height: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-144-6721, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→1-003-0070
NSN:5340-00-144-6721 FSC:5340 CAGE:99378 — ATLEE OF DELAWARE, INCORPORATED (USA)
SPECIFICATIONS
width
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
length
0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
material
COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
hole_diameter
0.1000 INCHES MINIMUM AND 0.1060 INCHES MAXIMUM IN
hole_quantity
2
overall_height
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
style_designator
STANDOFF
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
loop/holding_dimension
0.390 INCHES MINIMUM IN
distance_from_loop_center_to_end
0.250 INCHES NOMINAL IN
NSN
5340-00-144-6721
COMPONENT DIAGRAM
KEY FEATURES
•
LOOP/HOLDING DIMENSION: 0.390 INCHES MINIMUM IN
•
HOLE DIAMETER: 0.1000 INCHES MINIMUM AND 0.1060 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.250 INCHES NOMINAL IN
•
HOLE QUANTITY: 2
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
WIDTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION
0.390 INCHES MINIMUM IN
HOLE DIAMETER
0.1000 INCHES MINIMUM AND 0.1060 INCHES MAXIMUM IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1-003-0070?
1-003-0070 is a FRAME SECTION,STRUCTURAL,VEHICUL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1-003-0070?
There are 24 known substitutes for 1-003-0070: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 21 more. Substitute compatibility should be verified for your specific system.
Is 1-003-0070 still available?
1-003-0070 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.