PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 098-2-1313
098-2-1313 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG ASSEMBLY,SEALING is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY AND RUBBER SYNTHETIC, design_type: THREADED, overall_diameter: 0.500 INCHES NOMINAL IN, end_item_identification: 2590-01-659-5320;KIT, BATTLE DAMAGED ASSESSMENT (BDAR), part_name_assigned_by_controlling_agency: PLUG, HOLE, 1/2 INCH IN, connector_nominal_thread_size_for_which_designed: 0.250 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-663-1700, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
098-2-1313
NSN: 5340-01-663-1700
FSC: 5340
CAGE: 0J426 — PARTS MASTER INC DYNA SYSTEMS DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY AND RUBBER SYNTHETIC
design_typeTHREADED
overall_diameter0.500 INCHES NOMINAL IN
end_item_identification2590-01-659-5320;KIT, BATTLE DAMAGED ASSESSMENT (BDAR)
part_name_assigned_by_controlling_agencyPLUG, HOLE, 1/2 INCH IN
connector_nominal_thread_size_for_which_designed0.250 INCHES IN
NSN5340-01-663-1700
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 098-2-1313 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.500 INCHES NOMINAL IN
•
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED: 0.250 INCHES IN
•
DESIGN TYPE: THREADED
•
MATERIAL: COPPER ALLOY AND RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATION2590-01-659-5320;KIT, BATTLE DAMAGED ASSESSMENT (BDAR)
OVERALL DIAMETER0.500 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPLUG, HOLE, 1/2 INCH IN
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED0.250 INCHES IN
DESIGN TYPETHREADED
MATERIALCOPPER ALLOY AND RUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
16253Interchangeable
interchangeable cross-reference
interchangeable
C15004-225Interchangeable
interchangeable cross-reference
interchangeable
767-6047-001Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
WG210264Interchangeable
interchangeable cross-reference
interchangeable
0162-10060LPDInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 098-2-1313?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 098-2-1313?
098-2-1313 is a PLUG ASSEMBLY,SEALING.
What parts can replace 098-2-1313?
There are 17 known substitutes for 098-2-1313: 16253, C15004-225, 767-6047-001 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 098-2-1313?
098-2-1313 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-663-1700. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 098-2-1313

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026