PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WG210264
WG210264 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, housing_bore_diameter: 2.502 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-431-0999, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WG210264
NSN: 5330-00-431-0999
FSC: 5330
CAGE: 97578 — TIMKEN GEARS & SERVICES INC. DBA PHILADELPHIA GEAR DIV WESTERN REGIONAL SERVICE CENTER (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
housing_bore_diameter2.502 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.625 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-431-0999
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: WG210264 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
MATERIAL: STEEL CASE
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.625 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.502 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
SEAL WIDTH0.375 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
MATERIALSTEEL CASE
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.625 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.502 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
16253Interchangeable
interchangeable cross-reference
interchangeable
C15004-225Interchangeable
interchangeable cross-reference
interchangeable
767-6047-001Interchangeable
interchangeable cross-reference
interchangeable
14591AInterchangeable
interchangeable cross-reference
interchangeable
14591Interchangeable
interchangeable cross-reference
interchangeable
1625-0Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WG210264?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WG210264?
WG210264 is a SEAL,PLAIN ENCASED.
What parts can replace WG210264?
There are 15 known substitutes for WG210264: 16253, C15004-225, 767-6047-001 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for WG210264?
WG210264 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-431-0999. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WG210264

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026