PartsTable
Technical Data Sheet
Download PDF

091-08687 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

091-08687: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: ROUND, nut_diameter: 0.872 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN, thread_class: 3B, nut_thickness: 0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_series: UNEF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-816-2501, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
091-08687
NSN: 5310-00-816-2501
FSC: 5310 — Nuts and Washers
CAGE: 9P5N5 — MOOG MILITARY AIRCRAFT LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleROUND
nut_diameter0.872 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
thread_class3B
nut_thickness0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_seriesUNEF
hardness_rating40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM NUT
drive_point_depth0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
drive_point_width0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
NSN5310-00-816-2501
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 091-08687 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNEF
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
•
DRIVE POINT WIDTH: 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.562 INCHES IN
•
NUT DIAMETER: 0.872 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
NUT THICKNESS: 0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNEF
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
DRIVE POINT WIDTH0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.562 INCHES IN
NUT DIAMETER0.872 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
NUT THICKNESS0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
COUNTERSINK ANGLE89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM NUT
SUBSTITUTES & CROSS-REFERENCES 1
8687Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 091-08687?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 091-08687?
091-08687 is a NUT,PLAIN,ROUND.
What parts can replace 091-08687?
There is 1 known substitute for 091-08687: 8687. Substitute compatibility should be verified for your specific system.
What is the NSN for 091-08687?
091-08687 is cataloged in the U.S. Government catalog under NSN 5310-00-816-2501. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 091-08687