PartsTable
Technical Data Sheet
Download PDF

8687 — KEY BLANK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8687: KEY BLANK.

The KEY BLANK is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: ROUND, nut_diameter: 0.872 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN, thread_class: 3B, nut_thickness: 0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_series: UNEF. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-473-5968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8687
NSN: 5340-00-473-5968
NIINs: 004735968, 008162501
FSC: 5340 — Hardware, Commercial
CAGE: 14608 — EMHART INDUSTRIES INC CORBIN CABINET LOCK HARDWARE DIV (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleROUND
nut_diameter0.872 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
thread_class3B
nut_thickness0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_seriesUNEF
hardness_rating40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM NUT
drive_point_depth0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
drive_point_width0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
NSN5340-00-473-5968
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8687 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS
SPECIAL FEATURESBRASS OR NICKEL SILVER
SUBSTITUTES & CROSS-REFERENCES 5
00FSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
20FReference document
Same NSN cross-reference
Reference document — Secondary reference
C107Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2619FReference document
Same NSN cross-reference
Reference document — Secondary reference
66BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8687?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8687?
8687 is a KEY BLANK.
What parts can replace 8687?
There are 5 known substitutes for 8687: 00F, 20F, C107 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8687?
8687 is cataloged in the U.S. Government catalog under NSN 5340-00-473-5968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8687