PartsTable
Technical Data Sheet
Download PDF

090-048 — 090-048

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

090-048: 090-048.

The 090-048 is a the manufacturer industrial component. Key specifications include movement_type: MOVING COIL, PERMANENT MAGNET, overall_width: 2.660 INCHES NOMINAL IN, overall_height: 2.520 INCHES NOMINAL IN, overall_length: 1.920 INCHES NOMINAL IN, style_designator: RECTANGULAR FLUSH MTG, features_provided: ZERO ADJUSTER. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-045-4007, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 090-048
NSN: 5310-00-045-4007
NIINs: 000454007, 001133424
FSC: 5310 — Nuts and Washers
CAGE: 55966 — SOUNDSCRIBER CO THE AN INDEPENDENTLY OWNED AND OPERATED BUSINESS (USA)
SPECIFICATIONS
movement_typeMOVING COIL, PERMANENT MAGNET
overall_width2.660 INCHES NOMINAL IN
overall_height2.520 INCHES NOMINAL IN
overall_length1.920 INCHES NOMINAL IN
style_designatorRECTANGULAR FLUSH MTG
features_providedZERO ADJUSTER
sensitivity_rating200.0 MICROAMPERES
accuracy_in_percent-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
installation_designPANEL
mounting_stud_length0.540 INCHES NOMINAL IN
mounting_stud_diameter0.138 INCHES NOMINAL IN
scale_division_quantity20 SINGLE INDICATOR SINGLE RANGE
NSN5310-00-045-4007
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 090-048 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 0.250 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.250 INCHES MAXIMUM IN
MATERIAL THICKNESS0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
END ITEM IDENTIFICATIONMRAP - M-ATV WITH CS13 POP AND SNE; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
MATERIALSTEEL OVERALL
HOLE DIAMETER0.141 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 10
L-6493-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35338-41Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AN935C6Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4198010-16Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5310PL1389694Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS122028Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 090-048?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 090-048?
090-048 is a 090-048. It is classified as a MRO (MRO_GENERAL).
What parts can replace 090-048?
There are 10 known substitutes for 090-048: L-6493-1, MS35338-41, AN935C6 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 090-048?
090-048 is cataloged in the U.S. Government catalog under NSN 5310-00-045-4007. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 090-048

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.