PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35338-41
MS35338-41 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.141 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.250 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-045-4007, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35338-41
NSN: 5310-00-045-4007
FSC: 5310
CAGE: 0158B — PSA PEUGEOT-CITROEN ESPANA, SA (ESP)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.141 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.250 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OVERALL
material_thickness0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
end_item_identificationMRAP - M-ATV WITH CS13 POP AND SNE; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
material_document_and_classificationFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-045-4007
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35338-41 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD ALL MATERIAL RESPONSES OVERALL
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD ALL MATERIAL RESPONSES OVERALL
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
END ITEM IDENTIFICATIONMRAP - M-ATV WITH CS13 POP AND SNE; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.250 INCHES MAXIMUM IN
MATERIAL THICKNESS0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
HOLE DIAMETER0.141 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
700-0308Interchangeable
interchangeable cross-reference
interchangeable
008010-1Interchangeable
interchangeable cross-reference
interchangeable
40704-1Interchangeable
interchangeable cross-reference
interchangeable
99018-11Interchangeable
interchangeable cross-reference
interchangeable
AP465Interchangeable
interchangeable cross-reference
interchangeable
83004Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35338-41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35338-41?
MS35338-41 is a WASHER,LOCK.
What parts can replace MS35338-41?
There are 33 known substitutes for MS35338-41: 700-0308, 008010-1, 40704-1 and 30 more. Substitute compatibility should be verified for your specific system.
Is MS35338-41 still available?
MS35338-41 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35338-41

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026