PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 03234
03234 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, thickness: 0.062 INCHES NOMINAL IN, shank_length: 0.479 INCHES NOMINAL IN, hole_diameter: 1.125 INCHES NOMINAL IN, overall_length: 2.188 INCHES NOMINAL IN, shank_diameter: 0.088 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-739-0806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
03234
NSN: 5315-00-739-0806
FSC: 5315
CAGE: 26344 — NEW HAVEN MFG CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
thickness0.062 INCHES NOMINAL IN
shank_length0.479 INCHES NOMINAL IN
hole_diameter1.125 INCHES NOMINAL IN
overall_length2.188 INCHES NOMINAL IN
shank_diameter0.088 INCHES NOMINAL IN
overall_diameter1.500 INCHES NOMINAL IN
special_features5815-00-078-5480,TELETYPEWRITER,SET,AN/TGC-14A/V A
style_designatorSHOULDER
shoulder_diameter0.124 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
NSN5315-00-739-0806
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 03234 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER DIAMETER: 0.124 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDER
•
MATERIAL: STEEL COMP 416 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SHANK LENGTH: 0.479 INCHES NOMINAL IN
•
SHANK DIAMETER: 0.088 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES5815-00-078-5480,TELETYPEWRITER,SET,AN/TGC-14A/V A
SHOULDER DIAMETER0.124 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
MATERIALSTEEL COMP 416 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.188 INCHES NOMINAL IN
SHANK LENGTH0.479 INCHES NOMINAL IN
SHANK DIAMETER0.088 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
03234Interchangeable
interchangeable cross-reference
interchangeable
P6665-475-2311 PC 4Interchangeable
interchangeable cross-reference
interchangeable
16DInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 03234?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03234?
03234 is a WASHER,FLAT.
What parts can replace 03234?
There are 3 known substitutes for 03234: 03234, P6665-475-2311 PC 4, 16D. Substitute compatibility should be verified for your specific system.
What is the NSN for 03234?
03234 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-739-0806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03234

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026