PartsTable
Technical Data Sheet
Download PDF

16D — HOSE,NONMETALLIC

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

16D: HOSE,NONMETALLIC.

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE, temp_rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.875 INCHES NOMINAL IN, outside_diameter: 1.234 INCHES NOMINAL IN, operating_pressure: 800.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 3200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-017-9843, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16D
NSN: 5305-00-017-9843
NIINs: 000179843, 007532076, 014493219
FSC: 5305 — Screws
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
temp_rating-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.875 INCHES NOMINAL IN
outside_diameter1.234 INCHES NOMINAL IN
operating_pressure800.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure3200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
end_item_identification4920-01-347-1666; USED ON SUPPORT EQUIPMENT (SE),B-2 BOMBER AIRCRAFT
inside_surface_conditionSMOOTH
hydrostatic_test_pressure1600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
minimum_inside_bending_radius7.380 INCHES IN
layer_composition_and_location1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC
NSN5305-00-017-9843
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 16D · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.500 INCHES NOMINAL IN
•
THREAD LENGTH: 1.000 INCHES MINIMUM IN
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
FASTENER LENGTH1.500 INCHES NOMINAL IN
THREAD LENGTH1.000 INCHES MINIMUM IN
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 5 GRADE
MINIMUM TENSILE STRENGTH120000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 5
FFS85TYPE2STYLE10PGRADE5Reference document
Same NSN cross-reference
Reference document — Identification reference
802291Reference document
Same NSN cross-reference
Reference document — Secondary reference
179843Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35295-64Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
988Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 16D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16D?
16D is a HOSE,NONMETALLIC.
What parts can replace 16D?
There are 5 known substitutes for 16D: FFS85TYPE2STYLE10PGRADE5, 802291, 179843 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16D?
16D is cataloged in the U.S. Government catalog under NSN 5305-00-017-9843. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.