PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0323006-01
0323006-01 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, shank_length: 0.058 INCHES NOMINAL IN, overall_length: 0.308 INCHES NOMINAL IN, shank_diameter: 0.0938 INCHES MINIMUM AND 0.0948 INCHES MAXIMUM IN, first_end_style: CHAMFERED, second_end_style: CHAMFERED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-124-2583, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0323006-01
NSN: 5315-00-124-2583
FSC: 5315
CAGE: 09959 — AIRCRAFT INSTRUMENTS CO (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
shank_length0.058 INCHES NOMINAL IN
overall_length0.308 INCHES NOMINAL IN
shank_diameter0.0938 INCHES MINIMUM AND 0.0948 INCHES MAXIMUM IN
first_end_styleCHAMFERED
second_end_styleCHAMFERED
style_designatorSHOULDER
shoulder_diameter0.125 INCHES NOMINAL IN
first_end_locationBOTH ENDS
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.015 INCHES NOMINAL IN
second_end_taper_angle30.0 DEGREES NOMINAL
NSN5315-00-124-2583
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0323006-01 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END STYLE: CHAMFERED
•
FIRST END LOCATION: BOTH ENDS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: SHOULDER
•
SHANK DIAMETER: 0.0938 INCHES MINIMUM AND 0.0948 INCHES MAXIMUM IN
•
SECOND END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
SHOULDER DIAMETER: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END STYLECHAMFERED
OVERALL LENGTH0.308 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORSHOULDER
SHANK DIAMETER0.0938 INCHES MINIMUM AND 0.0948 INCHES MAXIMUM IN
SECOND END TAPER LENGTH0.062 INCHES NOMINAL IN
SHOULDER DIAMETER0.125 INCHES NOMINAL IN
MATERIALSTEEL COMP 303 OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
FFS92TYPE1STYLE9SInterchangeable
interchangeable cross-reference
interchangeable
MECD368696-6Interchangeable
interchangeable cross-reference
interchangeable
100-7S6-8Interchangeable
interchangeable cross-reference
interchangeable
59823Interchangeable
interchangeable cross-reference
interchangeable
6328Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-2692Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0323006-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0323006-01?
0323006-01 is a PIN,SHOULDER,HEADLESS.
What parts can replace 0323006-01?
There are 14 known substitutes for 0323006-01: FFS92TYPE1STYLE9S, MECD368696-6, 100-7S6-8 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0323006-01?
0323006-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-124-2583. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0323006-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026