PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100-7S6-8
100-7S6-8 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, thread_length: 0.500 INCHES NOMINAL IN, screw_material: STEEL.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-043-6665, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100-7S6-8
NSN: 5305-00-043-6665
FSC: 5305
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_length0.500 INCHES NOMINAL IN
screw_materialSTEEL
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE
thread_quantity_per_inch32
NSN5305-00-043-6665
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 100-7S6-8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
•
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 9S STYLE
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.138 INCHES IN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
HEAD HEIGHT0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
THREAD LENGTH0.500 INCHES NOMINAL IN
THREAD CLASS2A A
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
0323006-01Interchangeable
interchangeable cross-reference
interchangeable
63-2-8Interchangeable
interchangeable cross-reference
interchangeable
59823Interchangeable
interchangeable cross-reference
interchangeable
2995323Interchangeable
interchangeable cross-reference
interchangeable
6838Interchangeable
interchangeable cross-reference
interchangeable
961963-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100-7S6-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100-7S6-8?
100-7S6-8 is a SCREW,MACHINE.
What parts can replace 100-7S6-8?
There are 23 known substitutes for 100-7S6-8: 0323006-01, 63-2-8, 59823 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100-7S6-8?
100-7S6-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-043-6665. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100-7S6-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026