PartsTable
Technical Data Sheet
Download PDF

03-11 — LADDER,EXTENSION-A-FOLDING

✓ Government record, cited
Multibrackets · ORING SEAL
PRODUCT OVERVIEW

03-11: LADDER,EXTENSION-A-FOLDING.

Due to its extension arm it is also suitable in most living rooms, allowing everyone to create the perfect movie theatre at home. Its flexibility allows the user to adjust the distance from the ceiling to the projector. Without the extension arm, the projector will hang 150 mm from the ceiling.

The adjustable extension arm can be set to 150 mm or 430-630 mm. Projector cables can easily be hidden inside the extension arm. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-911-8913, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
03-11
NSN: 5340-00-911-8913
NIINs: 009118913, 009696407, 012692274, 014601367
FSC: 5340 — Hardware, Commercial
CAGE: 13201 — MATTHEW WARREN, INC DIV HELICAL PRODUCTS (USA)
SPECIFICATIONS
center_hole_diameter1.250 INCHES NOMINAL IN
cross-sectional_height0.210 INCHES NOMINAL IN
NSN5340-00-911-8913
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 03-11 MFR: Multibrackets ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE
•
HEIGHT: 0.120 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE
•
WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 303
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE
HEIGHT0.120 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE
WIDTH0.500 INCHES NOMINAL IN
MATERIALSTEEL COMP 303
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
500192-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 03-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03-11?
03-11 is a LADDER,EXTENSION-A-FOLDING manufactured by Multibrackets.
What parts can replace 03-11?
There is 1 known substitute for 03-11: 500192-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 03-11?
03-11 is cataloged in the U.S. Government catalog under NSN 5340-00-911-8913. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03-11