PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 016168600
016168600 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, construction: SOLID, housing_bore_diameter: 3.750 INCHES NOMINAL IN, accommodated_shaft_diameter: 3.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-239-0507, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
016168600
NSN: 5330-00-239-0507
FSC: 5330
CAGE: 81118 — EATON CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
seal_width0.375 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
constructionSOLID
housing_bore_diameter3.750 INCHES NOMINAL IN
accommodated_shaft_diameter3.000 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-239-0507
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 016168600 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
HOUSING BORE DIAMETER: 3.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
CONSTRUCTION: SOLID
•
ACCOMMODATED SHAFT DIAMETER: 3.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.375 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
HOUSING BORE DIAMETER3.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
CONSTRUCTIONSOLID
ACCOMMODATED SHAFT DIAMETER3.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
V106Interchangeable
interchangeable cross-reference
interchangeable
HC4850-12Interchangeable
interchangeable cross-reference
interchangeable
1218-12Interchangeable
interchangeable cross-reference
interchangeable
S8541Interchangeable
interchangeable cross-reference
interchangeable
5AE30RITY1Interchangeable
interchangeable cross-reference
interchangeable
30R6-3-8-IN.Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 016168600?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 016168600?
016168600 is a SEAL,PLAIN.
What parts can replace 016168600?
There are 11 known substitutes for 016168600: V106, HC4850-12, 1218-12 and 8 more. Substitute compatibility should be verified for your specific system.
Is 016168600 still available?
016168600 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 016168600

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026