PartsTable
Technical Data Sheet

V106 — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include length: 59.188 INCHES MINIMUM AND 60.312 INCHES MAXIMUM IN, material: RUBBER SYNTHETIC TUBE, stop_type: OPEN TOP, seal_width: 0.375 INCHES NOMINAL IN, tape_width: 0.938 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5325-00-174-2908, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V106
NSN: 5325-00-174-2908
FSC: 5325
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
length59.188 INCHES MINIMUM AND 60.312 INCHES MAXIMUM IN
materialRUBBER SYNTHETIC TUBE
stop_typeOPEN TOP
seal_width0.375 INCHES NOMINAL IN
tape_width0.938 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
constructionSOLID
exterior_colorBLACK
inside_diameter0.375 INCHES NOMINAL IN
slider_quantity1
outside_diameter0.625 INCHES NOMINAL IN
performance_typeHEAVY DUTY
NSN5325-00-174-2908
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: V106 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM OR COPPER ALLOY OR PLASTIC OR STEEL OVERALL
•
COLOR: OLIVE DRAB, QM-7 TAPE
•
SLIDER QUANTITY: 1
•
STOP TYPE: CLOSED BOTTOM
•
PERIPHERAL CONTOUR: STRAIGHT
•
SLIDER PULL QUANTITY: 2
TECHNICAL CHARACTERISTICS
MATERIALALUMINUM OR COPPER ALLOY OR PLASTIC OR STEEL OVERALL
COLOROLIVE DRAB, QM-7 TAPE
SLIDER QUANTITY1
STOP TYPECLOSED BOTTOM
STOP TYPEOPEN TOP
PERIPHERAL CONTOURSTRAIGHT
SLIDER PULL QUANTITY2
COLOROLIVE DRAB THONG
LENGTH59.188 INCHES MINIMUM AND 60.312 INCHES MAXIMUM IN
FASTENER TAPE EXTENSION LENGTH1.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
1218-12InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5AE30RITY1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
30R6-3-8-IN.InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
V406InterchangeableGOVERNMENT REGISTRY
Rack,electrical Equipment
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V106?
V106 is a HOSE,NONMETALLIC.
What parts can replace V106?
There are 4 known substitutes for V106: 1218-12, 5AE30RITY1, 30R6-3-8-IN. and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V106?
V106 is cataloged in the Federal Logistics Information System under NSN 5325-00-174-2908. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V106