PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00601-1
00601-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, groove_width: 0.062 INCHES NOMINAL IN, grommet_style: ROUND, hole_diameter: 0.219 INCHES NOMINAL IN, overall_height: 0.188 INCHES NOMINAL IN, flange_thickness: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-192-9396, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00601-1
NSN: 5330-00-192-9396
FSC: 5330
CAGE: 05262 — FREUDENBERG-NOK GENERAL PARTNERSHIP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
groove_width0.062 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.219 INCHES NOMINAL IN
overall_height0.188 INCHES NOMINAL IN
flange_thickness0.062 INCHES NOMINAL IN
groove_outside_diameter0.344 INCHES NOMINAL IN
grommet_construction_typeSOLID
large_flange_outside_diameter0.438 INCHES NOMINAL IN
NSN5330-00-192-9396
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00601-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER: 0.755 INCHES NOMINAL IN
•
OUTER EDGE THICKNESS: 0.1750 INCHES MINIMUM AND 0.1840 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.312 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED, STRAIGHT FACE
•
MATERIAL: UNABLE TO DECODE
•
RING STYLE: CONCENTRIC
•
OUTSIDE DIAMETER: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER0.755 INCHES NOMINAL IN
OUTER EDGE THICKNESS0.1750 INCHES MINIMUM AND 0.1840 INCHES MAXIMUM IN
MATERIAL THICKNESS0.312 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED, STRAIGHT FACE
MATERIALUNABLE TO DECODE
RING STYLECONCENTRIC
OUTSIDE DIAMETER1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
11-4785Interchangeable
interchangeable cross-reference
interchangeable
2708 1-2 4AInterchangeable
interchangeable cross-reference
interchangeable
EE-49756Interchangeable
interchangeable cross-reference
interchangeable
902Interchangeable
interchangeable cross-reference
interchangeable
00601-1Interchangeable
interchangeable cross-reference
interchangeable
371-511Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00601-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00601-1?
00601-1 is a GROMMET,NONMETALLIC.
What parts can replace 00601-1?
There are 7 known substitutes for 00601-1: 11-4785, 2708 1-2 4A, EE-49756 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00601-1?
00601-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-192-9396. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00601-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026