PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0042808
0042808 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL ROLLER, bore_shape: STRAIGHT, overall_width: 0.7087 INCHES NOMINAL IN, surface_finish: GROUND, locating_feature: NONLOCATING, special_features: INNER RING AND ROLLER ASSY,NO OUTER RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-0681, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0042808
NSN: 3110-00-117-0681
FSC: 3110
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialSTEEL ROLLER
bore_shapeSTRAIGHT
overall_width0.7087 INCHES NOMINAL IN
surface_finishGROUND
locating_featureNONLOCATING
special_featuresINNER RING AND ROLLER ASSY,NO OUTER RING
internal_fit-up_designationSTANDARD
standard_tolerance_designationRBEC NO.1
NSN3110-00-117-0681
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 0042808 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL INNER RING
•
LOCATING FEATURE: NONLOCATING
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.7087 INCHES NOMINAL IN
MATERIALSTEEL INNER RING
LOCATING FEATURENONLOCATING
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
MATERIALSTEEL ROLLER
SPECIAL FEATURESINNER RING AND ROLLER ASSY,NO OUTER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
41564Interchangeable
interchangeable cross-reference
interchangeable
43277Interchangeable
interchangeable cross-reference
interchangeable
SC41-33Interchangeable
interchangeable cross-reference
interchangeable
M24136/3-08Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-24136/3Interchangeable
interchangeable cross-reference
interchangeable
803-6915568-20.Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0042808?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0042808?
0042808 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace 0042808?
There are 10 known substitutes for 0042808: 41564, 43277, SC41-33 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0042808?
0042808 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-0681. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0042808

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026