PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70-1241
70-1241 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SOCKET,PLUG-IN ELECTRONIC COMPON. Key specifications include material: PLASTIC BODY, body_style: TOP MOUNT W/TABS, case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, thread_class: 2A LOCATION NOT OTHERWISE SPECIFIED A, overall_width: 13.530 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-113-1497, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70-1241
NSN: 5330-00-113-1497
FSC: 5330
CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
materialPLASTIC BODY
body_styleTOP MOUNT W/TABS
case_styleSQUARE
seal_width0.250 INCHES NOMINAL IN
thread_class2A LOCATION NOT OTHERWISE SPECIFIED A
overall_width13.530 INCHES NOMINAL IN
overall_height8.100 INCHES NOMINAL IN
overall_length2.030 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
special_featuresSUCTION CUP MOUNT FOR VEHICLE USE; MOUNT USED WITH HAND HELD GPS; PART NUMBER 980598-08; EUROPEAN
thread_directionRIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
dc_voltage_rating20.0 VOLTS NOMINAL
NSN5330-00-113-1497
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 70-1241 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 0.999 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.250 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
HOUSING BORE DIAMETER0.999 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER0.500 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SPECIAL FEATURESCRES SPRING
SEAL WIDTH0.250 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALCOPPER ALLOY CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
167840Interchangeable
interchangeable cross-reference
interchangeable
520078Interchangeable
interchangeable cross-reference
interchangeable
54162-5Interchangeable
interchangeable cross-reference
interchangeable
R9W600-172Interchangeable
interchangeable cross-reference
interchangeable
70-1241Interchangeable
interchangeable cross-reference
interchangeable
10865529Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70-1241?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70-1241?
70-1241 is a SOCKET,PLUG-IN ELECTRONIC COMPON.
What parts can replace 70-1241?
There are 11 known substitutes for 70-1241: 167840, 520078, 54162-5 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70-1241?
70-1241 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-113-1497. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70-1241

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026