PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0-41L35
0-41L35 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.334 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN, thread_length: 0.792 INCHES MINIMUM IN, screw_material: STEEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-849-6607, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0-41L35
NSN: 5305-00-849-6607
FSC: 5305
CAGE: 43990 — NORGREN C A CO (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.334 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN
thread_length0.792 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.875 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.216 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-849-6607
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 0-41L35 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES
•
THREAD CLASS: 2A A
•
HEAD STYLE: FILLISTER
•
SCREW MATERIAL: STEEL
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
INTERNAL DRIVE STYLE: SLOT
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES
THREAD CLASS2A A
HEAD STYLEFILLISTER
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLESLOT
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD DIAMETER0.216 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
MILB933TYPEBInterchangeable
interchangeable cross-reference
interchangeable
34141SInterchangeable
interchangeable cross-reference
interchangeable
107294-2Interchangeable
interchangeable cross-reference
interchangeable
MS51858-2Interchangeable
interchangeable cross-reference
interchangeable
103101Interchangeable
interchangeable cross-reference
interchangeable
462481Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0-41L35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0-41L35?
0-41L35 is a SCREW,MACHINE.
What parts can replace 0-41L35?
There are 11 known substitutes for 0-41L35: MILB933TYPEB, 34141S, 107294-2 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0-41L35?
0-41L35 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-849-6607. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0-41L35

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026